> For the complete documentation index, see [llms.txt](https://docs.tiny.plus/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tiny.plus/guides/everyday/document-templates.md).

# Submissions settings

Every setting for project sheets, submission packs and fee proposals, in one place: the switches, your firm's look, section templates, fees, the categories packs match on, and who builds them.

Everything tiny+ needs for project sheets, submission packs and fee proposals is under [Account Settings -> Submissions](https://crm.tiny.plus/account/submissions). It has a screen for each part: **Overview**, **Look**, **Section templates**, **Fees**, **Categories** and **People**. A tick on a screen's tab says that part is done.

[Set up submissions](https://crm.tiny.plus/submissions/setup) walks a new firm through the same settings in order. The two always agree: change something in one and the other shows it.

{% hint style="warning" %}
Submission packs, fee proposals and AI drafting are invite only for now. Accounts we've invited see their settings here; other accounts see only the settings for project sheets. If you'd like to try them, [get in touch](https://crm.tiny.plus/help).
{% endhint %}

{% hint style="success" %}
Project sheets are in every plan. Submission packs, fee proposals and AI drafting are part of the Pro plan. Account Admins change these settings.
{% endhint %}

The first time an admin opens the page, an introduction explains what submissions do, with a way into the set-up guide. **About submissions**, at the end of the tabs, opens it again.

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-6e92a7d7826fa2e08e6464a7e0fd061bb2e66220%2Fsubmissions-intro-admin.png?alt=media" alt="The introduction: Write proposals and fees in tiny+, then four steps: CVs and Project Sheets, set your look, build a pack and price it, with Walk me through set-up" width="979"><figcaption></figcaption></figure>

## Overview

The Overview turns things on and says where each part stands.

* **Project sheets** and **Submission packs** are switched on and off here. Submission packs need project sheets, so turn those on first. Turning either off keeps everything already written for when it's turned on again.
* **AI drafting for submissions** lets people with an AI seat use **Order with AI** and **Draft from the chosen records** on the pack builder. It's the same switch as the one under [Account Settings -> AI Usage](https://crm.tiny.plus/account/ai), and it says exactly what is sent.
* **Where things stand** lists each screen with what's been done, links to **Tag project sheets**, and shows how far the set-up guide has got.

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-f04401d788bbf49ee73de6dfff78023a4432981b%2Fsubmissions-settings-overview.png?alt=media" alt="The tabs, Overview, Look, Section templates, Fees, Categories and People with ticks, and the Where things stand card listing each part and the set-up guide&#x27;s count" width="979"><figcaption></figcaption></figure>

## Look

A **layout** is the look of every page: the cover, the sheets, the CVs, the contents and the dividers. There are five, plus any of your own. **Cover**, **Sheet** and **CV** under each open a sample built with your own colours, font and logo.

One layout is the **default**: it draws project sheets and CVs, and every new pack and fee proposal starts with it. Tick **Offered for packs and fee proposals** on any others, and whoever writes a pack or a proposal can choose one of them instead, under **Layout** on its first step. Untick one, and the packs that used it go back to the default.

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-82fc4797cd44bea8d844242ade15d1cc1fdd8b84%2Fdocument-templates-look.png?alt=media" alt="The Layout card with Classic, Bold, Editorial, Gallery (chosen) and Minimal, each with three thumbnails and a sample link, then The look: the logo, the main colour and tint, the font, Add a font, the footer line, the paper size and how many pages a sheet or CV may run to" width="979"><figcaption></figcaption></figure>

**The look** then makes the documents yours:

* **Logo on the documents**: your account's logo unless you choose another for documents.
* **Main colour** for headings, rules and the cover title, and a light **tint** behind a sheet's facts and down the side of a CV.
* **Font**: one of those offered, each shown in its own face, or your own. **Add a font** takes a TrueType file you're licensed to embed. A PDF carries only the characters it uses. A Word file names the font, so a reader without it installed sees their default.
* **Footer line**, the **paper** (the usual size for your country, A4 or US Letter), and whether a sheet or CV keeps to **one page each**.
* **A pack is built as** a PDF, a Word file or both, to begin with; each pack can change it.

### Your own layout

If your firm already has tender documents it likes, tiny+ can make a layout from them for your account alone. Under the layouts, **Want your own layout?** takes your documents, as PDF or Word files (up to 10, 20 MB each), and a note on which to follow or what to leave out. **Send to tiny+** sends them to us; the card then says where your request stands, and we email you when it's ready.

Your layout then appears beside the five, marked **Your own**, with **Cover**, **Sheet** and **CV** samples to look at before you choose it. It shapes every page of the PDF: packs, project sheets, CVs, statements and fee proposals. Word files keep the standard layout, in your colours, font and logo. Your words always come from your records, and your colours and font still apply, so you can adjust them here as with any layout. If your documents use a typeface of your own, upload it under **Add a font**.

{% hint style="info" %}
Your own layout is part of the Pro plan.
{% endhint %}

### Covers

A cover is the front page of a pack: a picture, your logo or the documents' logo, and a tagline, in your layout or another. Keep as many as you need, such as one per sector, and choose one when you write a pack. A pack can swap the cover's picture for one of the project's own.

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-da1fd87e6b14dd92698fe2f0a9011b2c93c90c2c%2Fdocument-templates-covers.png?alt=media" alt="The Covers card: the Standard cover, the default, with Edit, Preview and Remove, and New cover" width="979"><figcaption></figcaption></figure>

## Section templates

Each part of a document, from the cover and contents to a sheet, a CV, the letter and the fee table, has its template. **Edit** shows the template beside a preview; **Reset** goes back to the layout's own. Each layout keeps its own templates: when more than one layout is offered for packs and fee proposals, **Templates for** at the top chooses which layout's you're changing. Leave these alone unless someone at your firm knows HTML: the layout and the look cover most firms.

## Fees

### Fee templates

A fee proposal starts from a fee template: the stages the fee is split into, the lines under each, how disbursements are charged, and the words of the letter and terms. The starters are a lump sum by stage, a percentage of the construction cost, a time charge, and a fee letter.

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-6fb798eb28fb26f705403eca00c0888298889569%2Ffee-templates-card.png?alt=media" alt="The Fees screen: the Fee templates card with Harbourside standard as the default and the three starters, the Rate cards card with Harbourside rates 2026 as the default, and Tax" width="979"><figcaption></figcaption></figure>

**+ New fee template** starts from blank, a starter or one of your stage templates. **Edit** opens the template:

<figure><img src="https://1957838173-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LnoXYnzHXoSKmkXmIHw%2Fuploads%2Fgit-blob-23ebbaf8a2cd898d0b2c8065753aba18ae2b2acc%2Ffee-template-editor.png?alt=media" alt="The fee template editor: the name, grouped by stage, the five stages with their share of the fee and scope, a line under each, disbursements, the programme and the words with the tokens they can use" width="979"><figcaption></figcaption></figure>

* **Stages**: each with its share of the headline fee and the scope of services that stage covers. On a project that already has stages, the lines go onto the project's stages in order instead. Where those stages have fees, each stage's line takes that stage's share of the fee rather than the template's share. Template stages beyond the project's last stage fold into it.
* **Lines** under each stage, with a basis: a share of the fee, an amount, a percentage, hours at a role's rate, a provisional allowance, or an exclusion. *Other services* holds lines that sit outside the stages. A template can be a flat list instead.
* **What a percentage is of**: the construction value, the fee as a percentage of the construction value, the project's set fee, or a figure typed on the proposal. With *the fee, as a percentage of the construction value*, the template says what that percentage is, say 4.5%, and each percentage line is its share of the fee that gives: on a $10m building the fee is $450,000 and a 15% line is $67,500. The fee follows the project's construction value, and the percentage can be changed on each proposal. The *Percentage of construction cost* starting point is set up this way. With *the project's set fee*, a proposal takes the fee already on the project when it is started, and each percentage line is that share of it: 15% of a $250,000 fee is $37,500, whatever the building costs. The figure is kept on the proposal, where you can change it, so it stays put when the proposal later writes its own total to the project. A project with no fee set gives lines of nothing and a warning, never a percentage of the construction value.
* **Style**: whether new proposals from it start as a full proposal or a [fee letter](https://docs.tiny.plus/guides/everyday/submission-packs.md#fee-proposals), and which sections are on to start with. You can change the style on each proposal.
* **Disbursements**: none, a percentage of the fee, at cost, or an amount.
* **The words**: the letter, our understanding, assumptions, exclusions, payment, variations and how many days the proposal stands. Tokens such as `%name%`, `%client%` and `%fee_total%` are filled in from the project when a proposal starts; the hint under the words lists them all.

**Make default** sets the template a new proposal starts from.

### Rate cards

A rate card is a schedule of hourly rates by role, such as Director, Associate and Graduate. A time-charge line takes its rate from the proposal's card, and a proposal that charges time prints the card as its schedule of rates. Keep a card for each year or each kind of client. **Retire** keeps an old card on the proposals that use it and out of the list for new ones.

### Tax

**Tax** takes a label, such as *GST*, and a rate. With a rate set, a fee proposal adds the tax to its total. Leave the rate empty to print fees without tax. The project's fee is always written without tax.

## Categories

A pack matches a tender on three categories: **Sectors** (the kind of client or building), **Services** (what you did on a job) and **Expertise** (specialist know-how). Each is linked to one of your categories, chosen from the list or made for you. Each card shows its tags with how many approved project sheets carry them, and adds a tag in place. Changing which category is linked hides the old one's tags on sheets and CVs without deleting them; choosing it again brings them back.

**Tag project sheets** sets the sector, services, expertise and approval for every sheet on one page.

## People

Who can build submissions and fees: **Grant Submissions role** gives someone the right to change any project sheet, CV and capability statement and to build packs and fee proposals. Admins have it already, and all tiny+ users can read CVs. The same screen shows how many CVs each person has and asks the people you tick for a CV, by email from you with a task on their list.

## Who can do what

|                                                              | Who                                     |
| ------------------------------------------------------------ | --------------------------------------- |
| Everything on Account Settings -> Submissions                | Account Admins                          |
| Choosing a cover and a fee template for one pack or proposal | Records Admins and the Submissions role |
